|
| Brand Name: | Samsumg |
| Model Number: | SM 56mm |
| MOQ: | 1 pc |
| Price: | Negotiable |
| Payment Terms: | T/T, Western Union, MoneyGram |
Samsung SM Feeder used for SMT Production Line / SM 56mm Pneumatic Feeder
Introduction
This Samsung brand 56mm feeder is used for SM series machine, SM320/SM321/SM421/SM471/SM480.
With the copy new condition, 100 percent tested with stable quality.
Specification
| Feeder Model | Chip mounter Model |
|
Samsung CP 8*2mm feeder
|
Samsung CP40/CP45/CP60
|
|
Samsung CP 8*4mm feeder
|
Samsung CP40/CP45/CP60
|
|
Samsung CP 12mm feeder
|
Samsung CP40/CP45/CP60
|
|
Samsung CP 16mm feeder
|
Samsung CP40/CP45/CP60
|
|
Samsung CP 24mm feeder
|
Samsung CP40/CP45/CP60
|
|
Samsung CP 32mm feeder
|
Samsung CP40/CP45/CP60
|
|
Samsung CP 44mm feeder
|
Samsung CP40/CP45/CP60
|
|
Samsung CP 56mm feeder
|
Samsung CP40/CP45/CP60
|
|
Samsung SM 8*2mm feeder
|
SM320/SM321/SM421/SM471/SM480
|
|
Samsung SM 8*4mm feeder
|
SM320/SM321/SM421/SM471/SM480
|
|
Samsung SM 12mm feeder
|
SM320/SM321/SM421/SM471/SM480
|
|
Samsung SM 44mm feeder
|
SM320/SM321/SM421/SM471/SM480
|
|
Samsung SM 16mm feeder
|
SM320/SM321/SM421/SM471/SM480
|
|
Samsung SM 24mm feeder
|
SM320/SM321/SM421/SM471/SM480
|
|
Samsung SM 32mm feeder
|
SM320/SM321/SM421/SM471/SM480
|
|
Samsung SM 56mm feeder
|
SM320/SM321/SM421/SM471/SM480
|
Precautions for using Feida
1. The operator should pay attention to whether the Feida cover is tightly fastened when loading to avoid damaging the suction nozzle. When feeding, it is necessary to distinguish between tape and paper tape to avoid poor suction
2. When attaching the Feida to the machine, pay attention to whether the hook is securely fastened. If there is still shaking after fastening, replace the Feida immediately and hand it over to the Feida repairman.
3. Unused Feida must be fastened with the cover and returned to the Feida storage rack as required. When transporting flyovers, they should be carried by hand when the distance is close, and by a small car when the distance is far. The overlap of flyovers should not exceed 3 to avoid deformation.
5. Defective Feida should be labeled with a red tag and sent to the maintenance department for repair personnel to handle.
6. Other labels cannot be randomly pasted on Feida, and the lid should not be placed randomly after use.
